Panic Bar

---

Panic hardware

• Panic hardware, also known as an exit device (or fire exit hardware when used on fire doors), is designed to provide fast and easy egress to allow building occupants to exit safely in an emergency.
• Code publications define panic hardware as, “a door-latching assembly incorporating a device that releases the latch upon the application of a force in the direction of egress travel.” Panic hardware may also be used because of durability or ease of use, even when it is not required by code.

---

What is a panic bar?

• Crash bar (also known as a panic exit device, panic bar, or push bar) is a type of door opening mechanism which allows users to open a door by pushing a bar.

---

What is the height of a panic bar?

• Door handles, pulls, latches, locks and other operating devices shall be installed 34 inches (864 mm) minimum and 48 inches (1219 mm) maximum above the finished floor.

---

Why Panic Bar is Important?

• Useful in case of emergency because Panic Bar is fitted with alarm
• Quicker and Easier in use
• No speed reduction even in case of emergency , it allows people to pass through security doors efficiently

---

Where panic hardware is required?

Panic hardware is required on egress doors serving Educational and Assembly Occupancies with an occupant load of 100 people or more (as well as certain High Hazard occupancies).

---

What is panic hardware for?

• Panic Hardware is an exit device which is tested for use on a door that is required to have panic hardware, but cannot be used on a fire door. Since fire doors require positive-latching, fire exit hardware does not incorporate mechanical dogging.

---

Scope:

• The main purpose of the performance requirements of this standard is to give safe and effective escape through a doorway with minimum effort and without prior knowledge of the device, i.e. for locked doors on escape routes where panic situations can be foreseen.

---

Panic Exit Hardware

Single leaf Door Panic Bar

It is a horizontal and vertical metal bar fixed to the inside area of the door. It is a press bar mechanism which can be pressed easily in order to open the door and move out safely especially at the time of an emergency.

---

Specification-

• Suitable Door width upto 1200mm
• Suitable Door Height upto 2400mm
• Finish Silver

---

Double leaf Door Panic Bar-

The bar are usually placed on exit and fire doors for maintain high level of security. We also have team of quality checkers who test the product on certain parameters to assure the quality.

---

Specification-

• Suitable Door width: upto 1200mm
• Suitable Door Height: upto 2400mm
• Finish: Silver

---

External trim lock

• We make these trim by supreme quality material in order to deliver the best quality product to our customers.
• External trim lock is installed on outer side of a door in order to access the panic bar and make the door operational from outside.
• It can be in a form of a lock with lever handle or knob to operate the panic bar mechanism easily.
• This lock is effective when door is required to be both sides functional.

---

Lever Handle type External Trim

• External Trim is a locks installed on outer side of a door in order to access the panic bar and make the Door operational from outside.
• It can be a lock with lever handle or a knob to operate the panic bar mechanism easily. This lock is effective when there is an equal or adequate use of Door from both the openings & the Door is required to be both side functional.
• External Trim can be operational only with the help of key from the other side of the Door where panic bar is installed & if not required can be kept close.